TM 5-3805-254-20-1
REAR FUEL TANK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
8.
Filler neck of
Filler cap (2)
Unscrew and take off.
fuel tank (1)
9.
Right side of
Fitting (4)
Using 13/16-inch open-end wrench, un-
fuel tank (3)
screw and take off.
10. Bottom of fuel
Pipe plug (6)
Using 9/16-inch open-end wrench, un-
tank (5)
screw and take out.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-424).
11.
Fuel tank (7)
Clean (TB43-0212).
INSPECTION
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-424).
12.
Fuel tank (7)
Inspect (TB43-0212).
13.
All metal parts
Look for cracks, breaks, rust and
corrosion.
14.
All threaded parts
Look for damaged threads or rounded
heads.
REPAIR
WARNING
No welding, grinding or use of heat producing devices permitted near fuel tank
unless fuel tank has been cleaned and purged of all flammable liquids and vapors.
Failure to observe this precaution could cause serious injury to personnel.
2-540
