TM 5-3805-254-20-2
TRANSMISSION SHIFT CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT - CONTINUED
20. Shift control
Shift cable swivel
Put in.
swivel lever (1)
(2) and flat
Check for loose fit.
washer (3)
If tight on one side, take out and turn
one thread at a time away from tight
side and recheck until loose fit Is met.
If loose fit, go to step 21.
21. Shift cable
New cotter
Put in and bend back ends using 8-inch
swivel (2)
pin (4)
roundnose pliers.
22.
Jamnut (5)
Tighten using 7/16-inch open-end wrench.
TASK ENDS HERE
TA244286
2-926
