TM 5-3805-254-20-2
ENGINE WATER TEMPERATURE SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Transmission oil
Two wires (2) and
a.
Tag wires (page 2-424).
pressure switch (1)
two screws (3)
b.
Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
c.
Move wires aside.
2.
Adapter (4)
Transmission oil
a.
Place 10-gallon container underneath.
pressure switch (1)
b.
Using 5/8-inch and 11/16-inch open-
end wrenches, unscrew and take out.
INSTALLATION
3.
Adapter (4)
Transmission oil
a.
Clean pipe threads using wiping rag.
pressure switch (1)
b.
Wrap pipe threads with antiseizing tape
(page 2-424).
c.
Screw in and tighten using 5/8-inch
and 11/16-inch open-end wrenches.
4.
Transmission oil
Two wires (2) and
a.
Put wires in correct position.
pressure switch (1)
two screws (3)
b.
Screw in and tighten using 3/16-inch
flat-tip screwdriver.
c.
Get rid of tags.
TA244135
2-678
