TM 5-3805-254-20-2
ENGINE COMPRESSION BRAKE PRESSURE SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Engine Compression
Two wires (2) and
a
Tag wires (page 2-424).
brake pressure
two screws (3)
b
Using 3/16-inch flat-tip screwdriver,
switch (1)
unscrew and take out.
c
Move wires aside.
2
Torque converter
Engine Compression
a
Place 6-gallon container underneath.
housing (4)
brake pressure
b
Using 7/16-inch open-end wrench, un-
switch (1)
screw and take out.
INSTALLATION
3
Torque converter
Engine Compression
a
Clean pipe threads using wiping rag.
housing (4)
brake pressure
b
Wrap pipe threads with antiseizing tape
switch (1)
(page 2-424).
c
Screw in and tighten using 7/16-inch
open-end wrench.
4
Engine Compression
Two screws (3) and
a
Put wires in correct position.
brake pressure
two wires (2)
b
Screw in and tighten using 3/16-inch
switch (1)
flat-tip screwdriver.
c
Get rid of tags.
2-684