TM 5-3805-254-20-2
BRAKE TREADLE VALVE TO T-MANIFOLD HOSES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts
from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-
424).
See tags for correct location of airhoses.
13.
T-manifold (1)
45-degree elbow (2)
Wrap pipe threads with antiseizing tape.
14.
45-degree elbow (2)
Screw on and tighten using 1-inch open-
and airhose (3)
end wrench.
15.
T-manifold (1)
45-degree elbow (4)
Wrap pipe threads with antiseizing tape.
16.
45-degree elbow (4)
Screw on and tighten using 1-inch open-
and airhose (5)
end wrench.
17.
Brake treadle
Fitting (7)
Wrap pipe threads with antiseizing tape.
valve (6)
18.
Fitting (7)
Airhose (3)
a.
Screw on and tighten using 1-inch and
7/8-inch open-end wrenches.
b.
Takeoff tag.
c.
Get rid of tag.
19.
Brake treadle
90-degree elbow (8)
Wrap pipe threads with antiseizing tape.
valve (6)
20.
90-degree elbow (8)
Airhose (5)
a.
Screw on and tighten using 1-inch open-
end wrench.
b.
Take off tag.
c.
Get rid of tag.
21.
Under cab floor (9)
Clamp (10), screw
a.
Put clamp around air hoses (3 and 5)
(11), new lockwasher
and put in position.
(12), and nut (13)
b.
Screw in and tighten using 7/16-inch
box-end and 7/16-inch open-end
wrenches.
Change 1 2-1070
