TM 5-3805-254-20-2
RIGHT FRONT WHEEL TO FRONT BRAKE LIMITING AND QUICK RELEASE VALVE HOSES
This task covers:
a.
Removal (page 2-1122)
c.
Inspection/Replacement (page 2-1126)
b.
Cleaning (page 2-1126)
d.
Installation (page 2-1126)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Lockwasher, clamp (three required)
Goggles, safety
Rags, wiping (item 15, appendix C)
Wrench, box-end, 7/16-inch
Solvent, drycleaning (item 19, appendix C)
Wrench, open-end, 7/16-inch
Tags, marker (item 21, appendix C)
Wrench, open-end, 1/2-inch
Tape, antiseizing (item 22, appendix C)
Wrench, open-end, 5/8-inch
Wrench, open-end, 11/16-inch
Personnel Required
Wrench, open-end, 3/4-inch
Wrench, open-end, 7/8-inch
One
Wrench, open-end, 1-inch
Wrench, open-end, 1 1/8-inch
Equipment Condition
Wrench, open-end, 1 7116-inch
Airbrake system drained (page 2-1034).
Materials/Parts
Left and right side hood panels opened
(page 2-424).
Detergent, liquid, GP (item 7,
Right front wheel removed (page 2-1168).
appendix C)
Lockwasher, anchor coupling (two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
NOTE
Tag airhoses to ensure correct installation.
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1.
Rear airbrake
Airhose (2)
Tag.
chamber (1)
2.
Line nut (4) and
Using 3/4-inch and 5/8-inch open-end
fitting (3)
wrenches, unscrew and take off.
Change 1 2-1122
