TM 5-3805-254-20-2
SEAT BELTS
This task covers:
a.
Removal (page 2-1282)
b.
Installation (page 2-1282)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 1/2-inch drive
One
Socket, 5116-inch, 1/2-inch drive
Wrench, box-end, 3/4-inch
Equipment Condition
Wrench, open-end, 11/16-inch
Cab doors opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Right side rear
Two bolts (2) and
a.
Using 3/4-inch box-end wrench, un-
cab wall (1)
seat belts (3)
screw bolts and take out.
b.
Take off seat belts.
2.
Driver’s seat (4)
Two bolts (5), two
a.
Using 1/2-inch drive 5/16-inch socket,
nuts (6), and seat
ratchet handle, and 11/16-inch open-
belts (7)
end wrench, unscrew bolts and nuts and
take out.
b.
Take off seat belts.
INSTALLATION
WARNING
Seat belts must be positioned correctly for proper operation.
3.
Drivers seat (4)
Two bolts (5), two
a.
Put seat belts in place.
nuts (6), and seat
b.
Position seat belt at 45-degree angle.
belts (7)
c.
Screw in and tighten bolts and nuts using
1/2-inch drive 15/16-inch socket,
ratchet handle, and 11/16-inch open-
end wrench.
2-1282
