TM 5-3805-254-20-2
ALARM BELL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind instrument panel pad to prevent breaking or disconnecting wires.
1.
Alarm bell (1)
Three screws (2),
a
Using 3/8-inch box-end wrench and
three nuts (3),
number two cross-tip screwdriver, un-
three lockwashers
screw and take out.
(4), and three
b.
Get rid of lockwashers.
spacers (5)
2.
Two screws (6) and
a.
Tag wires (page 2-424).
two wires (7)
b.
Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
INSTALLATION
CAUTION
Use care when working behind instrument panel pad to prevent breaking or disconnecting wires.
3.
Alarm bell (1)
Two wires (7) and
a.
Put wires in place.
two screws (6)
b.
Screw in and tighten using 3/16-inch
flat-tip screwdriver.
c.
Get rid of tags.
4.
Three spacers (5),
Screw in and tighten using 3/8-inch box-
three screws (2),
end wrench and number two cross-tip
three new lock-
screwdriver.
washers (4), and
three nuts (3)
2-718
