TM 5-3805-254-20-2
HEATER CORE HOSES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Steps 35 thru 45 are for installation of outlet hose.
Steps 46 thru 59 are for installation of inlet hose.
Steps 60, 61, and 62 are typical for installation of both inlet and outlet hoses.
35.
Pipe (1)
Preformed outlet
a.
Put on.
hose (2) and
b.
Tighten using 1/4-inch flat-tip
hose clamp (3)screwdriver.
36.
Heater core
Preformed outlet
a.
Put on.
tube (4)
hose (2) and
b.
Tighten using 1/4-inch flat-tip
hose clamp (5)
screwdriver.
37.
Pipe (1)
Outlet hose (6) and
a.
Put on.
hose clamp (7)
b.
Tighten using 1/4-inch flat-tip
screwdriver.
TA244527
2-1313
