TM 5-3805-254-34
6-1.
AUXILIARY TRANSMISSION REPLACEMENT (Cont).
b.
INSTALLATION
NOTE
Perform step I for angle toward right rear of vehicle frame.
1.
Install angle (19) to vehicle frame with one screw (16) and two new locknuts (20).
NOTE
Perform step 2 for each of three remaining angles.
2.
Install angle (19) to vehicle frame with two screws (16) and new locknuts (20).
3.
Install rear transmission support (1) and front transmission support (9) to four angles (19) with four spacer sleeves
(15), eight insulators (14), four washers (18), screws (17), and new locknuts (13).
4.
Install lube fitting (12) to trunnion (8).
5.
Install trunnion (8) to front of auxiliary transmission (5).
6.
Install spacer (11) on top of trunnion (8).
TA703735
6-5