TM 5-3805-254-34
15-8.
CAB DOOR OPENING WEATHERSEAL REPLACEMENT (Con’t).
3.
Remove seven screws (6) and retainer (5) from
floor panel (7).
4.
Remove lower weatherseal (4) from floor panel
(7). Discard weatherseal.
5.
Clean
all
traces
of
rubber
cement
and
weatherseal (4) from cab door opening (1) and
floor panel (7)
b.
INSTALLATION
1.
Coat molding (2) with rubber cement and press new weatherseal (3) into place on molding.
2.
Install molding (2) on cab door opening (1).
3.
Coat floor panel (7) with rubber cement and press new lower weatherseal (4) into place on floor panel.
4.
Wipe cab door opening (1) and floor panel (7) free of excess rubber cement.
5.
Install retainer (5) on floor panel (7) with seven screws (6).
TA704136
15-27
