TM 5-3805-254-34
15-15.
CAB DOOR GLASS AND WINDOW REGULATOR REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Cab door upper and lower panels removed (see
• One seal
paragraph 15-13).
Tools/Test Equipment:
• General mechanic's tool kit
NOTE
If replacing window regulator only,
perform steps 4 and 8.
1.
Remove screw (5) from window channel (8) and
bracket (7).
2.
If damaged, remove two screws (6) and bracket
(7) from cab door (1).
3.
If bracket (7) was not removed, position window
channel (8) to right of bracket.
4.
Remove two retainer clips (9) from window
regulator (4). Remove window regulator from
door glass channel (3).
5.
Raise window regulator (4) arms to extreme
upper position and removed door glass (2)
through cab door (1) lower opening.
TA704147
15-38
