TM 5-3805-254-34
15-17. RIGHT DOOR VIEW GLASS REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Install new weatherseal (4) around edge of view glass (3).
2.
Press twine (5) into groove of weatherseal (4) with excess twine meeting at bottom of weatherseal. Use care to
keep twine straight and free of kinks.
3.
Apply detergent and water solution to groove of weatherseal (4).
4.
Position view glass (3) on outside of view glass opening (2) with excess twine (5) on inside of cab door (1).
5.
Have assistant press view glass (3) against view glass opening (2) from outside of cab door (1).
NOTE
Hold both sides of twine to prevent twine from pulling free of weatherseal before
lip of weatherseal Is fully over view glass opening.
6. Pull one end of twine (5) half-way around view glass (3) to raise lip of weatherseal (4) over view glass opening (2).
TA704153
15-45
