TM 5-3805-254-34
4-4.
RADIATOR MAINTENANCE (Con’t).
NOTE
*
Perform step 10 at each side of radiator.
*
Ensure that radiator is square with vehicle frame as nuts are tightened.
10.
Position stabilizer rod (27) in bracket (26) and install bushing (25), mount (24), washer (23), new lockwasher (22),
and nut (21).
11.
Remove lifting device.
NOTE
Perform steps 12 through 15 if stabilizer rods were removed from vehicle.
12.
Install right or left bracket (20) with two new lockwashers (19) and screws (18).
13.
Install rod end (10) on right or left stabilizer rod (9).
TA703687
4-34
