TM 5-3805-264-13&P
0042
INSTALLATION
WARNING
Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings
must be in good condition and of suitable capacity. Keep clear of parts supported only by
lifting device. Failure to comply may result in personnel injury, death, and/or damage to
equipment.
1.
Raise MCS tailgate (Figure 2, Item 5) to dump body (Figure 2, Item 8).
2.
Position MCS tailgate (Figure 2, Item 5) so that bottom pins (Figure 2, Item 7) are resting on dump body
stops (Figure 2, Item 6) and tailgate hinge pin holes are aligned with dump body hinge pin holes.
3.
Install hinge pins (Figure 2, Item 1) and linch pins (Figure 2, Item 2) on each side of MCS tailgate
(Figure 2, Item 5).
4.
Remove lifting slings (Figure 2, Item 4) from MCS tailgate (Figure 2, Item 5).
5.
Connect MCS quick-disconnect air line (Figure 2, Item 9).
6.
Connect MCS tailgate wiring harness connector (Figure 2, Item 3) to receptacle (Figure 2, Item 10).
0042-4
03/15/2011Rel(1.10)root(maintwp)wpno(M1001826413)