TM 5-3805-264-13&P
0048
REMOVAL
NOTE
Hoses should be tagged before removal (WP 0072).
1.
Disconnect two air lines (Figure 1, Item 5) from two elbows (Figure 1, Item 4) and remove elbows from air
cylinder (Figure 1, Item 6).
NOTE
Note position of nut at air cylinder piston shaft clevis to ensure proper adjustment of air
cylinder during installation.
2.
Remove cotter pin (Figure 1, Item 9) and pin (Figure 1, Item 7) to remove air cylinder (Figure 1, Item 6) from
tailgate release lever (Figure 1, Item 8).
3.
Remove cotter pin (Figure 1, Item 1) and pin (Figure 1, Item 3) to remove air cylinder (Figure 1, Item 6) from
dump body (Figure 1, Item 2).
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
INSTALLATION
1.
Install air cylinder (Figure 1, Item 6) on dump body (Figure 1, Item 2) with pin (Figure 1, Item 3) and cotter
pin (Figure 1, Item 1).
NOTE
Ensure that position of nut at air cylinder piston shaft clevis is the same as noted during
removal, to ensure proper adjustment of air cylinder during installation.
2.
Install air cylinder (Figure 1, Item 6) on tailgate release lever (Figure 1, Item 8) with pin (Figure 1, Item 7)
and cotter pin (Figure 1, Item 9).
3.
Install two elbows (Figure 1, Item 4) on air cylinder (Figure 1, Item 6). Connect two air lines
(Figure 1, Item 5) to elbows.
0048-2
03/15/2011Rel(1.10)root(maintwp)wpno(M1001726413)