TM 5-3805-264-14&P
APPENDIX C
REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
Section I. INTRODUCTION
C-1.
SCOPE.
This Repair Parts and Special Tools Lists (RPSTL) lists and authorizes spares and repair parts; special
tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required
for performance of Unit, Direct Support, and General Support Maintenance of the M917A1 and M917A1 w/MCS
Dump Truck Body. It authorizes the requisitioning, issue, and disposition of spares, repair parts, and special tools
as indicated by the Source, Maintenance and Recoverability (SMR) codes.
C-2.
GENERAL.
In addition to Section I, introduction, this RPSTL is divided into the following sections:
a. Section ll, Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in
the performance of maintenance. The list also includes parts which must be removed for replacement of the autho-
rized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in
each group listed in ascending figure and item number sequence. Bulk materials are listed by item name sequence
at the end of the section. Repair part kits are listed separately in their own functional group within Section II. Repair
parts for reparable special tools are also listed in this section. Items listed are shown on the associated illustra-
tion(s)/figure(s).
b. Section III. Special Tools List. A list of special tools special TMDE and other special support
equipment authorized by this RPSTL [as indicated by Basis of Issue (BOI) information in the DESCRIPTION AND
USABLE ON CODE (UOC) column] for the performance of maintenance. Not applicable. Refer to TM 9-2320-363-
24P.
c. Section IV. Cross-Reference Indexes. A list, in National Item Identification Number (NIIN)
sequence, of all National stock numbered items appearing in the listing, followed by a list in alphanumeric
sequence of all part numbers appearing in the listings. National Stock Numbers (NSN) and part numbers are
cross-referenced to each illustration/figure and item number appearance.
C-3.
EXPLANATION OF COLUMNS (SECTIONS II AND Ill).
a.
ITEM NO - Column (1). Indicates the number used to identify items called out in the illustration.
b.
SMR CODE - Column (2). The SMR code is a five-position code containing supply/requisitioning
information, maintenance category authorization criteria, and disposition instruction, as shown in the following
breakout:
Source Code
XXxxx
1 st two positions
How you get an item.
Maintenance Code
Recoverability Code
xxXXx
xxxxX
3d position
4th position
5th position
Who can install, replace or
Who can do complete
Who determines disposition
use the item.
repair* on the item.
action on an unserviceable item.
Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the “Repair” function in a
use/user environment in order to restore serviceability to a failed item.
C-1
