ENGINE REPLACEMENT (Cont).
Remove four nuts (3) and lockwashers (4) from
four studs (1) at top of engine (5). Discard
Install lifting eye (2) to four studs (1) and install
four new lockwashers (4) and nuts (3).
Use extreme caution when handling
engine. Lifting device Is required when
parts weigh over 50 lb (23 kg) for a
single person lift, over 100 lb (45 kg) for
a two person lift, and over 150 lb (68 kg)
for a three or more person lift. Keep
clear of heavy parts supported only by
lifting device. Failure to follow this
warning may result in serious Injury or
death to personnel.
Attach overhead lifting device to lifting eye (2)
and raise overhead lifting device just enough to
take weight of engine (5) off engine mounts (14).
Using floor jack or wood cribbing, support front of transmission (15).
Remove two screws (10), lockwashers (9), and housing cover (8) from right side of engine flywheel housing