For assistance in understanding your vehicle
weight
carrying
capability,
consult
your
local
International Harvester dealer or branch.
SPECIFICATIONS
ENGINE
NTC-290
Cylinders
6
Bore & Stroke
5-1/2 x 6 Inches
Piston Displacement (Cu. In.)
855
290 @ 2100 RPM
Firing Order
1-5-3-6-2-4
ELECTRICAL
Electrical System, 12 Volt
Negative Ground
TO THE OPERATOR
The purpose of this manual is to familiarize you
If you need major information not given in this
with the controls of your vehicle and to provide sufficient
manual, or if you require services of a trained
information to enable you to perform minor routine
serviceman, we urge you to use the extensive facilities
services necessary for continued efficient operation. To
offered by IH dealers and branches in your locality. IH
protect your equipment, study this manual before you
dealers and branches keep abreast of the best methods
start to operate the vehicle.
of servicing IH equipment, and have up-to-date facilities
for providing prompt, first-class service. They carry
When you need parts, always give the unit code
ample stocks of essential International service parts.
number, vehicle model and chassis serial number, and
the serial number of the unit for which the parts are
NOTE: For Cummins Engines refer to their
required.
We suggest that you write these serial
Engine Operator's Manual for detailed Diesel Engine
numbers in the spaces provided so that you have them
information.
at hand when parts are required. Request the salesman
to assist you in obtaining these serial numbers when the
vehicle is delivered to you.
VEHICLE MODEL
CHASSIS SERIAL NUMBER
(Stamped on plate cab door inner panel, left
(Stamped on frame left side rail, front)
side.)
ENGINE SERIAL NUMBER
TRANSMISSION NUMBER
(Cummins engines stamped on plate, left side of
(From specification cards.)
gear case, front of engine.)
FRONT AXLE NUMBER
REAR AXLE NUMBER
(From specification card)
(From specification card.)
2
