MOTOR TRUCK SERVICE MANUAL
BODIES AND CABS
3. Remove window regulator through cab door
lower opening, Fig. 13.
Fig. 13
To Install:
Fig. 11
Cab door window regulator installation is
accomplished by reversing the foregoing removal
WINDOW REGULATOR
procedure.
To remove cab door window regulator, proceed as
After window regulator installation, apply Lubriplate
follows:
110 or equivalent to window channel slides, Fig. 14.
To Remove:
1. Remove door glass as outlined under "CAB DOOR
GLASS REMOVAL AND INSTALLATION.
2. Remove window regulator retaining screws, Fig. 12.
Fig. 14
DOOR GLASS WINDOW CHANNEL
1. Remove cab door glass as outlined under "CAB
DOOR
GLASS
REMOVAL
AND
INSTALLATION."
2. Remove door glass rear run channel retainer,
Fig. 15.
Fig. 12
87
