BRAKES - AIR
TRUCK SERVICE MANUAL
necessary. A visual check may be made through the
GROOVED BRAKE LINING
inspection holes in the dust shields.
DUST SHIELDS
For visual inspection of brake lining wear, the linings of
the Stopmaster II can be grooved on the side, as shown,
as customer option. Also, as an option, the lining could
be chamfered on the 4 inner corners, as shown.
To further facilitate visual inspection of brake linings,
This makes it easier to determine how much the lining
dust shields of the Stopmaster II employ two inspection
has been worn, and when the vehicle should be
holes as shown. This allows the linings to be inspected
scheduled for relining. When the lining has worn down
without removing the dust shields from the brake. These
to the groove, or when the chamfered corners have been
dust shields have been stamped, above the inspection
worn away, replacement is
holes with the letters and numerals, "Stopmaster II" for
identification
of
service
parts.
219
