TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 10.
Using multimeter, set to ohms scale and adjust to 0 ohms. Connect red test lead to output terminal (14)
on fuse panel (15) and black test lead to POS 1 terminal (1) on automatic override module (2). Check for
0 ohms on multimeter. Disconnect test leads.
If multimeter reads no continuity, 19C wire (16) must be replaced.
Notify Direct Support Maintenance.
TA243796
2-131
