TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 7. Using multimeter, set to 20 vdc scale. Connect red test lead to wire terminal (7)
on wire connector (8) and black test lead to ground. Check for 11 to 13 vdc on
multimeter. Disconnect test leads.
a. If multimeter does not read 11 to 13 vdc 55B wire (9) must be
replaced. Notify Direct Support Maintenance.
b. If multimeter reads 11 to 13 vdc, install instrument panel pad (page
2-424). Go to step 8.
2-249
