TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 9.Open upper center instrument panel (page 2-424). Set multimeter to ohms scale and
adjust to 0 ohms. Pull wire terminal (6) off DOME terminal (9). Connect red test lead to DOME terminal (9) on DOME/PN
L light switch (7) and black test lead to ground. Rotate DOME/PNL light switch (7) until click is felt. Check for 0 ohms on
multimeter. Rotate DOME/PNL light switch (7) to dim position. Disconnect test leads.
a.
If multimeter reads no continuity, DOMEIPNL light switch
(7) must be replaced (page
2-722).
2-293
