TM 5-3805-254-20-1
AIR CLEANER HOUSING
This task covers:
a.
Removal (page 2-452)
d.
Inspection/Replacement (page 2-458)
b.
Disassembly (page 2-454)
e.
Assembly (page 2-458)
c.
Cleaning (page 2-457)
f.
Installation (page 2-460)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Gasket, wingnut
Goggles, safety
Lockwasher (two required)
Gun, air blow
Solvent, drycleaning (item 19, appendix C)
Handle, ratchet, 1/2-inch drive
Hose, air, assembly Personnel Required
Screwdriver, flat-tip, 1/4-inch
Socket, 9/16-inch, 1/2-inch drive One
Wrench, box-end, 9/16-inch
Wrench, open-end,’7/16-inch
Equipment Condition
Wrench, open-end, 9/16-inch
Left side hood panel opened (page 2-424).
Materials/Parts
References
Detergent, liquid, GP (item 7,
appendix C)
TM 9-247 (Authorized Cleaning Methods)
Element, air filter
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not operate engine after removing air cleaner housing. Foreign matter could enter
turbocharger air inlet pipe and cause damage to turbocharger or injury to personnel.
1.
Air cleaner
Hose clamp (2)
Using 1/4-inch flat-tip screwdriver,
housing (1)
loosen.
2-452
