TM 5-3805-254-20-1
PREHEATER PRIMER PUMP FUEL LINES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
38.
Bulkhead
Large nut (2) and
Screw on and tighten as shown using 1 1/&8-
fitting (1)
small nut (3)
inch and 1-inch open-end wrenches.
39.
Large nut (2)
Screw on and tighten using 1 1/8-inch and
and 90 elbow
1/2-inch open-end wrenches.
Fitting (4)
NOTE
Fuel lines are tagged for identification. Inlet fuel line is tagged as INLET-12.
40.
90 elbow fitting
Screw on and tighten using 9/16-inch and
(4) and inlet fuel
1/2-inch open-end wrenches.
line (5)
Do not take off tag.
41.
Large nut (2) and
a. Using 1 1/8-inch and 1-inch open-end
small nut (3)
wrenches, loosen both nuts.
b. Using 1-inch open-end wrench, un-
screw and take off small nut.
2-500
