TM 5-3805-254-20-1
ACCELERATOR CONTROL ROD
This task covers:
a.
Removal (page 2-550)
e.
Assembly (page 2-554)
b.
Disassembly (page 2-552)
f.
Installation (page 2-554)
c.
Cleaning (page 2-552)
g.
Adjustment (page 2-558)
d.
Inspection (page 2-553)
INITIAL SETUP:
Tools Personnel Required
Gloves, safety
One
Goggles, safety
Gun, blow, air
Equipment Condition
Hose, air, assembly
Measurer, tape
Right and left side hood panels opened
Pliers, diagonal-cutting,
(page 2-424).
6-inch
Battery cables disconnected (page 2-424).
Pliers, slip-joint, 6-inch
Air cleaner element removed (page 2-452).
Wrench, open-end, 7/16-inch
Wrench, open-end, 1/2-inch
References
(two required)
Wrench, open-end, 9/16-inch
TM 9-247 (Authorized Cleaning Methods)
(two required)
Materials/Parts
Cotter pin, accelerator control rod
Lockwasher, accelerator control rod
(two required)
Solvent, drycleaning (item 19, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Fuel pump bracket
Spring (3)
Using 6-inch slip-joint pliers, take off.
(1) and accelerator
control rod (2)
2.
Bracket (4) and
Spring (6)
Using 6-inch slip-joint pliers, take off.
modulator cable (5)
NOTE
For more information on cotter pins, go to General Maintenance Instructions (page
2-424).
2-550
