TM 5-3805-254-20-1
FAN DRIVEBELT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2.
Adjusting
Adjusting screw (2)
Using 9/16-inch, 1/2-inch drive socket,
bracket (1)
6-inch extension, and ratchet handle, turn
clockwise to loosen pulley.
Do not take out.
3.
Two pulleys
Two belts (5 and 6)
Take off.
(3 and 4)
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-424).
4.
Belts (5 and 6)
Look for cracks, breaks, chafing, and
hardness.
INSTALLATION
5.
Two pulleys
Two belts (5 and 6)
Put on.
(3 and 4)
ADJUSTMENT
NOTE
If three adjusting bracket screws are not loose, do step one.
6.
Adjusting
Adjusting screw (2)
Turn counterclockwise using 9/16-inch,
bracket (1)
1/2-inch drive socket, 6-inch extension,
ratchet handle, and belt-tension gage, to
obtain 90 to 110 lb (122.0 to 149.1 N.m)
belt-tension.
2-662
