TM 5-3805-254-20-1
WATER FILTER HOSES
This task covers:
a.
Removal (page 2-658)
c.
Inspection/Replacement (page 2-659)
b.
Cleaning (page 2-658)
d.
Installation (page 2-660)
INITIAL SETUP
Tools
Personnel Required
Pliers, slip-joint, 8-inch
One
Wrench, open-end, 3/4-inch
Equipment Condition
Materials/Parts
Right and left side hood panels opened
Detergent, liquid, GP (item 7,appendix C)
(page 2-424).
Rags, wiping (item 15, appendix C)
Cooling system drained (page 2-628).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Radiator (1)
Shutoff valve (2)
Using 8-inch slip-joint pliers, turn clock-
wise to close.
2.
Water manifold (3)
Shutoff valve (4)
Using 8-inch slip-joint pliers, turn clock-
wise to close.
3.
Filter base (5)
Hose (6)
Using 3/4-inch, open-end wrench, un-
screw and take off.
4.
Shutoff valve (2)
Hose (6)
Using 3/4-inch, open-end wrench, un-
screw and take off.
5.
Filter base (5)
Hose (7)
Using 3/4-inch, open-end wrench, un-
screw and take off.
6.
Shutoff valve (4)
Hose (7)
Using 3/4-inch, open-end wrench, un-
screw and take off.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-424).
2-658
