TM 5-3805-254-20-1
AIR COMPRESSOR COOLANT HOSES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2.
Air compressor (1)
Supply hose (2)
Using 1-inch open-end wrench, unscrew
and take off.
3.
Return hose (3)
Using 1-inch open-end wrench, unscrew
and take off.
4.
Cylinder block (4)
Return hose (3)
Using 1-inch, 3/8-inch drive flare-nut
crowfoot wrench, 10-inch extension, and
hinged handle, unscrew and take off.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-424).
5.
Supply hose (2) and
a.
Clean with solution of liquid detergent
return hose (3)
and water.
b.
Rinse in clean water.
c.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-424).
6.
Supply hose (2) and
Look for cracks, breaks, chafing, and
return hose (3)
hardness.
7.
All threaded parts
Look for damaged threads and rounded
heads.
INSTALLATION
8.
Cylinder block (4)
Return hose (3)
Screw in and tighten using 1-inch, 3/8-inch
drive flare-nut crowfoot wrench, 10-inch
extension, and hinged handle.
2-656
