TM 5-3805-254-20-1
ENGINE DIPSTICK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
7.
Oil pan (1)
Dipstick tube (2)
Put in place.
and new gasket (3)
8.
Two screws (4)
a.
Screw in until snug using 518-inch,
and two new lock-
1/2-inch drive socket and ratchet
washers (5)
handle.
b.
Using 5/8-inch, 1/2-inch drive socket
and 0 to 150 ft lb (O to 210 N.m) torque
wrench, torque to 30 to 35 ft lb (40 to
47 N-m).
9.
Dipstick tube
Screw (7), new lock-
a.
Put dipstick tube bracket in place.
bracket (6)
washer (8), and
b.
Screw in and tighten using two 9/16-inch
nut (9)
box-end wrenches.
NOTE
FOLLOW-ON MAINTENANCE: Close right side hood panel (page 2-424).
TASK ENDS HERE
2-16
