TM 5-3805-254-20-1
ENGINE AUXILIARY OIL FILTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves and use only in a
well-ventilated area. Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do not use near open
flame or excessive heat. The flashpoint for type #1 drycleaning solvent is 100°F (38°C) and for type #2 is 138°F
(59°C). If you become dizzy while using cleaning solvent, get fresh air immediately, and get medical aid. If
contact with eyes is made, flush your eyes with water and get medical aid immediately.
7.
Shell (1)
a. Clean with drycleaning solvent.
b. Using clean, dry wiping rags, wipe dry.
INSTALLATION
8.
Shell (1)
New filter
Put in place.
element (2)
9.
Wingnut (3)
Screw on and hand tighten.
10.
Cover (4)
New ring (5)
Put on.
11.
Shell (1)
Cover (4)
Put on.
12.
Ring (6), two
a. Put ring in place.
screws (7), and
b. Screw in and tighten using 1/2-inch
two new lock-
box-end wrench.
washers (8)
13.
Shell (1)
Drainplug (9) and
a. Screw in and tighten drainplug using
vent plug (10)
7/16-inch open-end wrench.
b. Tighten vent plug using 7/16-inch open-
end wrench.
14.
Right inner
Plate (12)
Put in.
fender (11)
2-12
