TM 5-3805-254-20-1
ENGINE FULL-FLOW OIL FILTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
WARNING
Dry-cleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves
and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not
breathe vapors. Do not use near open flame or excessive heat. The flashpoint for type #1 dry-
cleaning solvent is 100°F (38°C) and for type #2 is 138°F (59°C). If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical aid. If contact with eyes is made,
flush your eyes with water and get medical aid immediately.
6.
Shell (1)
a. Clean with dry-cleaning solvent.
b. Using clean, dry wiping rag, wipe dry.
INSTALLATION
7.
Engine oil
New packing (3)
Put in place.
cooler (2)
8.
Shell (1)
New filter
Put in place.
element (4)
9.
Engine oil
Shell (1)
Put in place.
cooler (2)
10.
Shell (1)
Shell screw (5)
Screw in and tighten using 9116-inch, 1/2-
inch drive socket,; inch extension, and
ratchet handle.
FILLING
11.
Pipe plug (6)
Screw in and tighten using 7116-inch box-
end wrench.
12.
Rocker housing
Filler cap (8) and
a. Take off filler cap.
cover (7)
filler neck (9)
b. Fill with 4 quarts of lubricating oil.
c. Put on filler cap.
2-8
