TM 5-3805-254-20-1
ENGINE FULL-FLOW OIL FILTER
This task covers:
a.
Draining (page 2-6)
d.
Installation (page 2-8)
b.
Removal (page 2-7)
e.
Filling (page 2-8)
c.
Cleaning (page 2-8)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Container, 10-gallon
Rags, wiping (item 15, appendix C)
Extension, 6-inch, 1/2-inch drive
Solvent, drycleaning (item 19, appendix C)
Handle, ratchet, 112-inch drive
Socket, 9/16-inch, 1/2-inch drive
Personnel Required
Wrench, box-end, 7/16-inch
One
Materials/Parts
Equipment Condition
Oil filter element with packing
Oil, lubricating (item 14, appendic C)
Right and left side hood panels opened
(page 2-424).
ACTION
LOCATION
ITEM
REMARKS
DRAINING
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
Hot engine oil could burn you. Care must be taken to prevent personnel injury.
NOTE
Engine oil must be warm and engine shut down (TM 5-3805-254-10) before draining oil.
1.
Shell (1)
Pipe plug (2)
a. Place 10-gallon container underneath.
b. Using 7/16-inch box-end wrench, unscrew and
take out.
c. Allow oil to drain.
d. Get rid of drained oil (page 2-424).
2-6
