TM 5-3805-254-20-1
ENGINE AUXILIARY OIL FILTER
This task covers:
a.
Draining (page 2-10)
d.
Installation (page 2-12)
b.
Removal (page 2-10)
e.
Filling (page 2-12)
c.
Cleaning (page 2-12)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Container, 10-gallon
Rags, wiping (item 15, appendix C)
Screwdriver, flat-tip, 114-inch
Solvent, drycleaning (item 19, appendix C)
Wrench, open-end, 7/16-inch
Wrench, box-end, 1/2-inch
Personnel Required
Materials/Parts
One
Filter element
Equipment Condition
Lockwasher, shell clamp
Ring, cover
Right and left side hood panels opened
Oil, lubricating (item 14,
(page 2-424).
appendix C)
ACTION
LOCATION
ITEM
REMARKS
DRAINING
1.
Right inner
Plate (2)
Using 1/4-inch flat-tip screwdriver, pry
fender (1)
out.
2.
Shell (3)
Drainplug (4) and
a. Place 10-gallon container underdrain-
vent plug (5) plug.
b. Using 7/16-inch open-end wrench,
loosen vent plug.
c. Using 7/16-inch open-end wrench, un-
screw and take out drainplug.
d. Allow oil to drain.
e. Get rid of drained oil.
REMOVAL
3.
Two screws (6), two
a. Using 1/2-inch box-end wrench, un-
lockwashers (7), and
screw and take out.
ring (8)
b. Take off ring.
c. Get rid of lockwashers.
2-10
