TM 5-3805-254-20-2
BACKUP LIGHT 20 AMP CIRCUIT BREAKER - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Connect battery ground cable (page 2-424).
2.
Install right instrument panel pad (page 2-424).
3.
Close right side cab door (page 2-424).
TASK ENDS HERE
HEATER 40 AMP CIRCUIT BREAKER
This task covers:
a.
Removal (page 2-752)
b.
Installation (page 2-753)
INITIAL SETUP
Tools
Personnel Required
Wrench, box-end, 3/8-inch
One
Materials/Parts
Equipment Condition
Lockwasher, circuit breaker
Battery ground cable disconnected
(two required)
(page 2-424).
Nut, self-locking
Right side cab door opened (page 2-424).
Tags, marker (item 21, appendix C)
Right instrument panel pad removed
(page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind right instrument panel pad to prevent breaking or disconnecting wires.
1.
Circuit breaker (1)
Self-locking nut (2)
a.
Tag wires (page 2-424).
and two wires (3)
b.
Using 318-inch box-end wrench, un-
screw and take off.
c.
Get rid of self-locking nut.
2.
Two nuts (4), two
a.
Using 3/8-inch box-end wrench, un-
lockwashers (5),
screw and take off.
and flat washer (6)
b.
Get rid of lockwashers.
2-752
