TM 5-3805-254-20-2
ENGINE COMPRESSION BRAKE 15 AMP CIRCUIT BREAKER - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Connect battery ground cable (page 2-424).
2.
Install right instrument panel pad (page 2-424).
3.
Close right side cab door (page 2-424).
TASK ENDS HERE
BACKUP LIGHT 20 AMP CIRCUIT BREAKER
This task covers:
a.
Removal (page 2-750)
b.
Installation (page 2-751)
INITIAL SETUP
Tools
Personnel Required
Wrench, box-end, 318-inch
One
Materials/Parts
Equipment Condition
Lockwasher, circuit breaker (two
Battery ground cable disconnected
required)
(page 2-424).
Nut, self-locking (two required)
Right side cab door opened (page 2-424).
Tags, marker (item 21, appendix C)
Right instrument panel pad removed
(page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind right instrument panel pad to prevent breaking or disconnecting wires.
1.
Circuit breaker (1)
Two self-locking
a.
Tag wires (page 2-424).
nuts (2) and two
b.
Using 3/8-inch box-end wrench,
wires (3)
unscrew and take off.
c.
Get rid of self-locking nuts.
2.
Two nuts (4), two
a.
Using 3/8-inch box-end wrench, un-
lockwashers (5),
screw and take off.
and flat washer (6)
b.
Get rid of lockwashers
2-750
