TM 5-3805-254-20-2
TURN SIGNAL SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
8.
Turn signal
Bracket (2) and
Screw in and tighten using number one
switch (1)
two screws (3)
cross-tip screwdriver.
9.
Wire harness (4)
Protective
Put on.
and horn wire (5)
covering (6)
10.
Steering column (7)
Turn signal switch
Screw in and tighten using number one
(1), bracket (2),
cross-tip screwdriver.
three screws (8),
and three new
lockwashers (9)
11.
Instrument
Screw (11), flat
Screw in and tighten using two 9/16-inch
panel (10)
washer (12), clamp
open-end wrenches.
(13), and nut (14)
12.
Instrument
Jamnut (15)
Screw on and tighten using two 9/16-inch
panel (10) and
open-end wrenches.
screw (11)
13.
Instrument panel
New electrical
Wrap loosely.
support (16) and
tiedown strap (17)
wire harness (4)
14.
Steering column (7)
Connector (18)
Push together.
2-746
