TM 5-3805-254-20-2
KEY SWITCH - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Close side right instrument panel (page 2-424).
2.
Connect battery ground cable (page 2-424).
3.
Close left side cab door (page 2-424).
TASK ENDS HERE
HEADLIGHT BEAM SELECTOR SWITCH
This task covers:
a.
Removal (page 2-742)
b.
Installation (page 2-743)
INITIAL SETUP
Tools
Personnel Required
Screwdriver, cross-tip, number
One
three
Equipment Condition
Materials/Parts
Left side cab door opened (page 2-424).
Lockwasher, switch (two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Cab (1)
Floormat (2)
Lift up and pull back.
2.
Headlight beam
Connector (4)
Pull off.
selector switch (3)
3.
Two screws (5)
a.
Using number three cross-tip screw-
and two lock-
driver, unscrew and take out.
washers (6)
b.
Get rid of lockwashers.
4.
Cab floor (7)
Headlight beam
Take out.
selector switch (3)
2-742
