TM 5-3805-254-20-2
ENGINE START BUTTON
This task covers:
a.
Removal (page 2-738)
b.
Installation (page 2-739)
INITIAL SETUP:
Tools
Personnel Required
Wrench, box-end, 5/16-inch
One
Wrench, box-end, 3/4-inch
Equipment Condition
Materials/Parts
Battery ground cable disconnected
Lockwasher, switch
(page 2-424).
Lockwasher, wire connectors (two
Left side cab door opened (page 2-424).
required)
Right side instrument panel opened
Tags, marker (item 21, appendix C)
(page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind instrument panel to prevent breaking or disconnecting wires.
1.
Engine start
Boot (2)
Unscrew and take off.
button (1)
2.
Nut (3) and
a.
Using 3/4-inch box-end wrench, un-
lockwasher (4)
screw and take off.
b.
Get rid of lockwasher.
3.
Instrument panel (5)
Engine start
Carefully move back behind right instrument
button (1)
panel (6).
4.
Engine start
Two nuts (7), two
a.
Tag wires (page 2-424).
button (1)
lockwashers (8), and
b.
Using 5/16-inch box-end wrench, un-
three wires (9)
screw and take off.
c.
Get rid of lockwashers.
2-738
