TM 5-3805-254-20-2
RIGHT ENGINE SIDE OF FIREWALL JUNCTION BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
8.
Firewall (1)
Junction box (2)
a.
Put junction box in place.
and two nuts (3)
b.
Screw on and tighten using 7/16-inch
open-end wrench and 7/16-inch box-
end wrench.
9.
Junction box (2)
Two wires (4)
a.
Put wires in place. See table below.
and nut (5)
b.
Screw on and tighten using 7/16-inch
box-end wrench.
c.
Take off tags.
d.
Get rid of tags.
10.
Ten wires (6) and
a.
Put wires in place.
eight new self-
b.
Screw on and tighten using 3/8-inch
locking nuts (7)
box-end wrench.
c.
Takeoff tags.
d.
Get rid of tags.
11.
Cover (8) and
a.
Put cover in place.
two wingnuts (9)
b.
Screw on and tighten.
2-776