TM 5-3805-254-20-2
LEFT ENGINE SIDE OF FIREWALL JUNCTION BOX - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Connect battery ground cable (page 2-424).
2.
Close left side hood panel (page 2-424).
TASK ENDS HERE
FRONT REAR OF CAB JUNCTION BOX
This task covers:
a.
Removal (page 2-780)
c.
Installation (page 2-782)
b.
Inspection/Replacement
(page 2-782)
INITIAL SETUP
Tools
Personnel Required
Screwdriver, cross-tip, number two
One
Wrench, box-end, 318-inch
Wrench, box-end, 7/16-inch
Equipment Condition
Wrench, open-end, 9/16-inch
Battery ground cable disconnected
Materials/Parts
(page 2-424).
Left side cab door opened (page 2-424).
Nut, self-locking (12 required)
Airbrake system drained (page 2-1034).
Tags, marker (item 21, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Driver seat valve
Line nut (2) and
Using 9/16-inch open-end wrench, un-
assembly (1)
air line (3)
screw and take off.
2.
Left lower rear
Eight screws (5)
Using number two cross-tip screwdriver,
molding (4)
and eight flat
unscrew and take out.
washers (6)
3.
Left side rear cab
Air line (3) and
a.
Push air line through hole in molding.
wall (7)
left lower rear
b.
Take out molding.
molding (4)
2-780
