TM 5-3805-254-20-2
LEFT STOPLIGHT/TAILLIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
9.
Stoplight/taillight
Backup lamp (2)
a.
Aline pins on lamp with slots in stoplight/
assembly (1)
taillight assembly.
b.
Push in, turn clockwise, and release.
10.
Tail, turn, and
a.
Aline pins on lamp with slot in stoplight/
stop lamp (3)
taillight assembly.
b.
Push in, turn clockwise, and release.
If lamp will not turn, take out, turn 180
degrees, and repeat a and b.
11.
New gasket (4),
a.
Put gasket in place.
lens (5), and
b.
Put lens in place.
four screws (6)
c.
Screw in and tighten using number one
cross-tip screwdriver.
INSTALLATION
NOTE
Taillight and bracket mating surfaces must be free of paint, dirt, and grease to ensure proper ground.
12.
Bracket (7)
Stoplight/taillight
a.
Hold stoplight/taillight assembly in
assembly (1), three
place.
nuts (8), and three
b.
Screw in and tighten using 7/16 inch
new lockwashers (9)
box-end wrench.
13.
Stoplight/
Seven wires (10)
a.
Put wires in correct position and push
taillight (1)
on.
b.
Take off tags.
c.
Get rid of tags.
14.
Terminal cover (11)
a.
Put cover in place.
and four screws (12)
b.
Screw in and tighten using number one
cross-tip screwdriver.
2-790
