TM 5-3805-254-20-2
RIGHT STOPLIGHT/TAILLIGHT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Stoplight/taillight
Terminal cover (2)
Using number one cross-tip screwdriver,
assembly (1)
and four screws (3)
unscrew and take out.
2.
Three wires (4)
a.
Tag wires (page 2-424).
b.
Take off.
3.
Bracket (5)
Stoplight/taillight
a.
Hold stoplight/taillight.
assembly (1), three
b.
Using 7/16-inch box-end wrench, un-
nuts (6), and three
screw and take out.
lockwashers (7)
c.
Get rid of lockwashers.
DISASSEMBLY
4.
Stoplight/
Four screws (8),
a.
Using number one cross-tip screw-
taillight (1)
lens (9), and
driver, unscrew and take out.
gasket (10)
b.
Get rid of gasket.
5.
Tail, turn, and
Push in, turn counterclockwise, and take
stop lamp (11)
out.
6.
Backup lamp (12)
Push in, turn counterclockwise, and take
out.
INSPECTIONIREPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
7.
Stoplight/taillight
Look for cracks, breaks, or corrosion.
(1), lens (9), and
terminal cover (2)
8.
All threaded parts
Look for damaged threads or rounded
heads.
2-792
