TM 5-3805-254-20-2
BATTERY BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
NOTE
Position battery retainer and side panel as shown.
24
Side panel (1)
Battery retainer
a
Put in place.
(2), two new lock-
b
Screw on and tighten, using 3/8-inch
washers (3), and
box-end wrench.
two nuts (4)
NOTE
Hardware must be installed in location and direction shown.
25
Battery box (5)
Side panel (1),
a
Put in place.
three screws (7),
Hook (6) must face towards outside
of battery box.
three new lock-washers
(8), and
b
Screw on and tighten using 9116-inch,
three nuts (9)
1/2-inch drive socket and ratchet handle
and 9/16-inch box-end wrench.
TA244237
2-852
