TM 5-3805-254-20-2
BATTERY BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
NOTE
Hardware must be installed facing center of battery box.
28
Battery box (1)
Step (2), four
a
Put step in place.
screws (3), four
b
Screw in and tighten, using 9/16-inch,
new lockwashers (4),
112-inch drive socket and ratchet handle
and four nuts (5)
and 9/16-inch box-end wrench.
NOTE
Hardware and straps must be installed in location and direction shown.
29
Four screws (6),
a
Put in place.
four straps (7),
b
Screw on and tighten, using 9/16-inch,
four new lockwashers
1/2-inch drive socket and ratchet handle
(8), and four nuts (9)
and 9/16-inch box-end wrench.
2-854