TM 5-3805-2520-2
OPTICAL LIGHT LAMP - CONTINUED
NOTE
_
FOLLOW-ON MAINTENANCE:
1
Close lower center instrument panel (page 2-424).
2
Connect battery cables (page 2-424).
3
Close left side cab door (page 2-424).
TASK ENDS HERE
OPTICAL LIGHT ASSEMBLY
This task covers:
a
Removal (page 2-858)
c
Assembly (page 2-859)
b
Disassembly (page 2-858)
d
Installation (page 2-859)
INITIAL SETUP
Tools
Personnel Required
Screwdriver, cross-tip, number one
One
Screwdriver, flat-tip, 3/16-inch
Wrench, box-end, 1/4-inch
Equipment Condition
Materials/Parts
Battery cables disconnected (page 2-424).
Left side cab door opened (page 2-424).
Lockwasher, bracket
Left center instrument panel opened (2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Optical light
Socket (2)
Turn counterclockwise and pull out.
assembly (1)
2
Lower instrument
Two screws (4) and
a
Using number one cross-tip screw-
panel (3)
bracket (5)
driver, unscrew and take out.
b
Take off bracket.
DISASSEMBLY
3
Bracket (5) and
Screw (6), flat
a
Using 3/16-inch flat-tip screwdriver and
optical light
washer (7), lock-
1/4-inch box-end wrench, unscrew and
assembly (1)
washer (8), and
take off.
nut (9)
b
Get rid of lockwasher.
2-858
