TM 5-3805-254-20-2
INTERNAL OIL FILTER - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install transmission oil pan (page 2-900).
TASK ENDS HERE
TRANSMISSION SHIFT CONTROL
This task covers:
a. Removal (page 2-910)
c. Inspection/Replacement (page 2-913)
b. Cleaning (page 2-913)
d. Installation (page 2-914)
INITIAL SETUP
Tools
Materials/Parts - Continued
Extension, 10-inch, 1/2-inch drive
Lockwasher, shift cable bracket (two required)
Gloves, safety
Lockwasher, side cover (four required)
Goggles, safety
Lockwasher, U-bolt (two required)
Handle, ratchet, 1/2-inch drive
Nut, self-locking, shift control
Pen, marking
Rags, wiping (item 15, appendix C)
Pliers, roundnose, 8-inch
Solvent, drycleaning (item 19, appendix C)
Socket, 1/2-inch, 1/2-inch drive
Wrench, box-end, 3/8-inch
Personnel Required
Wrench, box-end, 7116-inch
Wrench, box-end, 1/2-inch
One
Wrench, torque, 0 to 175 ft lb
(0 to 245 N.m)
Equipment Condition
Materials/Parts
Left side cab door opened (page 2-424).
Cotter, pin, shift cable swivel
Lockwasher, control stand (four
required)
2-909
