TM 5-3805-254-20-2
TRANSMISSION SHIFT CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
13
Transmission shift
Shift control
Put in driving range 1.
control (1)
lever (2)
14
Transmission shift
Transmission shift
Put in.
control stand (3)
control (1)
15
Shift lever
Shift cable
Put in hole marked during removal.
plate (4)
swivel (5)
16
Shift cable
New self-locking
Screw on and tighten using 112-inch box-
swivel (5)
nut (6)
end wrench.
17
Adapter plate (7)
Shift control cable
a
Put shift control cable in position.
(8), spacer (9),
b
Put in spacer and U-bolt.
U-bolt (10), two
c
Screw on and tighten using 38-inch
flat washers (11),
box-end wrench.
two new lockwashers
Make sure shift control cable is not
(12), and two
being forced to one side
If shift
nuts (13)
control cable is being forced to one
side, loosen two nuts, adjust, and
retighten.
18
Transmission shift
Indicator light wire
Aline and push together.
control stand (3)
connector (14)
Make sure indicator light wire (15) Is
clear of all moving parts.
19
Four screws (16) and
Screw in and tighten using 7/16-inch box-
four new lock-
end wrench.
washers (17)
20
Side cover (18),
a
Put side cover in place.
four screws (19),
b
Screw in and tighten using 7/16-inch
and four new lock-
box-end wrench.
washers (20)
2-914
