TM 5-3805-254-20-2
TRANSMISSION SHIFT CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
22.
Transmission oil
Shift cable bracket
Put in place.
pan (1)
(2) and two
spacers (3)
23.
Two screws (4) and
Screw in and torque to 17 to 20 ft lb (23 to 27
two new lock-
N.m) using 1/2-inch, 1/2-inch drive
washers (5)
socket, 10-inch extension, and 0 to 175 ft lb
(0 to 245 N.m) torque wrench.
24.
Shift cable
Flat washer (7)
Put on.
swivel (6)
25.
Shift control
Shift cable
Put in.
swivel lever (8)
swivel (6)
26.
Shift cable
Flat washer (9) and
a.
Put on flat washer.
swivel (6)
new cotter pin (10)
b.
Put in cotter pin and bend back ends
using 8-inch roundnose pliers.
NOTE
FOLLOW-ON MAINTENANCE: Close left cab door (page 2-424).
TASK ENDS HERE
TA244279
2-916
